Reset

Connettersi con il cavo console ed accendere lo switch con il tasto "mode" premuto ed attendere fino a quando sulla console appare:

Using driver version 1 for media type 1
Base ethernet MAC Address: 4c:30:2d:81:ef:80
Xmodem file system is available.
The password-recovery mechanism is enabled.
The system has been interrupted prior to initializing the
flash filesystem. The following commands will initialize
the flash filesystem, and finish loading the operating
system software:
flash_init
 boot
switch:

Inizializzare la flash

switch: flash_init
Initializing Flash...
...done Initializing Flash.

Cancellare il file di configurazione dalla flash

switch: del flash:config.text
Are you sure you want to delete "flash:config.text" (y/n)?y
File "flash:config.text" deleted

Cancellare le vlan dalla flash

switch: del flash:vlan.dat
Are you sure you want to delete "vlan.dat" (y/n)?y
File "flash:vlan.dat" deleted

Riaviare lo switch

switch: boot