1.    Home
2. Network
3. Cisco
4. Router
5. 1941 VDSL

Router 1941 VDSL

PARAMETRI DA MODIFICARE
LAN+1 MASK = indirizzo LAN +1 seguito dalla sua mask
PTP = indirizzo PTP seguito dalla sua mask
PTP+1 MASK = indirizzo PTP +1

RICORDARSI DI SALVARE

wr mem

controller VDSL 0/0/0
 operating mode vdsl2
!
interface Embedded-Service-Engine0/0
 no ip address
 shutdown
!
interface GigabitEthernet0/0
 description INTERNET
 ip address LAN+1 MASK
 duplex auto
 speed auto
!
interface ATM0/0/0
 no ip address
 shutdown
 no atm ilmi-keepalive
!
interface Ethernet0/0/0
 description connected to Internet
 no ip address
!
interface Ethernet0/0/0.835
 encapsulation dot1Q 835
 ip address PTP+1 MASK
 ip virtual-reassembly in
!
ip route 0.0.0.0 0.0.0.0 PTP